Goldtool TCT 2690 Pro, Alat yang sangat berguna, dapat mengecek kualitas krimping kabel coaxial, telp, UTP, dan kabel lainnya.Mengukur panjang kabel, sambungan yang bermasalah dan posisi kabel yang bermasalah.

MAIN FEATURES :

* Check Coax , type 5, 5e and 6 twisted cord network andtrouble.
* Check cable sequence .
* Use TDR (time domain reflect meter), Measure lengthand distance, find the trouble location.
* Find the determined open circuit, short circuit, jumper,crossfire or split pairs.
* Service line test and no external adaptor is required.
* Determine continuity and wiring pattern.
* Exclusive Pouch included

Package of Contents :

1 x LAN TESTER DIGITAL GOLDTOOL TCT-2690 PRO
1 x Exclusive Pouch ( Tas )
2 x F connector to BNC Male (SDI) Adapter,
2 x RJ-45 to socket RJ-11 Plastic Adapter
1 x Manual Book
1 x 9V Battery Learn more »

GoldTool TCT-700 3-in-1 Tracer/ Toner/ Cable Tester 

TCT-700 is a multi-functions tester for RJ-45 LAN cable, BNC/F coaxial cable, tone generator, talk battery, continuity.

It is the useful tool set for electrical appliance contractors in the VDV (Voice/data/video) market, professionals in telecommunication, network and digital communication, or general people using home networks and students to be used for network installations, VDV (Voice/Data/Video) detection and failure diagnosis, etc.

The plastic sensing tip is used to avoid accidental short-circuits,wherein it is provided with volume adjusting knob, audio frequency signal strength indicator and ear plug for applications in different environment, and it has many different interfaces - RJ-45 jack and test pin, and is attached with power shortage indicator and is hand-free to carry for on-site use.

Features:

• automatic power-off
• possibility of headphones connection
• connection map test: discontinuity, short circuit, reversed pairs, crossed pairs
• LED signal strength indication
• transmitter Toner interfaces: RJ45, BNC, Test Leads Cable
• maximum test cable length of 1000 m
• possibility of identifing and tracing wires or cables with no damage to insulation
• tracing a tone, cable continuity, polarity, verifying a line
• adjustable volume control
• alligator clips to connect open wires and for direct connection of internet and telephone cables

Specification Goldtool TCT-700:

• Brand : GoldTool
• Tester type : wiring system tester
• Signal frequency : 500...781Hz
• Power supply : 1 battery 9V 6F22 (Toner) , 1 battery 9V 6F22 ( Tracker )
• Display : 15 LED ( Toner) , 3 LED (Tracker)
• Detection : cable and wire continuity, cables in walls
• Voltage protection: 48VDC or 24VAC
• Signal frequency 500Hz~781Hz
• Signal volume: >30dB
• Maximum Cable length for test: 1000 meter
• Minimum receiver distance: 60cm

Package Of Contents :

1 x Tracer1 x Tone Generator
1 x Remote Terminator 
1 x BNC to F female
1 x BNC Cable
1 x BNC terminal Resistance
1 x 9V battery 
2 pcs1 x Belt Clip
1 x Nylon Bag
1 x User Manual Learn more »

Tenmars TM902 Lan Cable Tester

- Detects opens shorts miswires and split pairs on the twisted pair cabling on the LAN cable.

- Measures length.

- Auto backlit.

- Auto power off.

The backlit LCD screen displays graph wire-map, opens, shorts, miswires, split pairs and the remote ID number all on one screen. Using multiple remote ID up to 8 locators to test on RJ-45 (UTP, STP) LAN cable.

Spesification:

Model:	TM-901N	TM-902 (for OEM olny)
Connector type	RJ-45
Cable category	LAN cable (UTP, STP),cable.
Wire-map test	Detects opens, shorts, miswires, split pairs
Length test	up to 255 M (836 ft)
Length resolution	0.1 m (ft)
Length units	Meter and Foot
Accuracy	+/- 10% + 1.0M (3 ft)
Operating temp. and RH	5 to 40 ºC, below 80% RH.
Storage temp. and RH	-10 to 60ºC, below 70%.
Power	9V batteryx1	1.5V battery x 6
Dimensions (L x W x H)	130 x 56 x 38mm.	156 x 73 x 35mm
Weight	About 160g	About 170g
Accessories	User’s manual, battery, Carrying case, Test Cable x1, Remote ID (1) x1

Learn more »

FEATURES:

- The 880 AT is a simplified Version of an appliance tester which use
low voltage and low current to perform it' s checks.
- Application Example
The appliance is plugged into the mini appliance checker, then the
probe make contact with the protective conductor.
- Other appliance checking
Washing Machine Toaster Iron Dish Washer
Stove 

SPECIFICATIONS:

ELECTRICAL
Resistance Ranges : The L-E led will lit when the resistance
between Line to Earth is lower than 1M© 
± 5% . 
The N-E led will lit when the resistance
between Neutral to Earth is lower than
1M© ± 5% . 
The EARTH BOND led will lit when the
resistance between the EARTH to the
Probe is higher than 10© ± 5% . 
Test Current : Line to Earth test current is 9uA
Maximum.
Neutral to Earth test current is
9uA maximum.
Earth to Probe test current is 2.3mA
maximum. 
Maximum Output
Voltage : 9V rm
Response Time : 0.1secs nominal
Voltage Withstand : 6V AC between any two terminals
Battery Low Indication point : 7V nominal 

MECHANICAL
Size : 72mm x 150mm x 36 mm
Material : ABS
Weight
( less carrying case) : Approx.194g ( with battery) 
Display : LEDs 

ENVIRONMENTAL
Operating temperature Range : -15º C to + 55 º C
Storage Temperature: -20 º C to + 70º C 
General
Battery : 9V( 6F22) x 1
Safety standard : EN 61010-1
EN 61326-1

 

============================

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P      : 081283804273/085774067221
WA      : 081932632003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link     : http://darmatek.indonetwork.co.id

             http://darmatek01.blogspot.com

Learn more »

 

FEATURES :
-Designed for RJ45/RJ11 modular cables, 10/ 100 base-T cable and
Token Ring cable.
-The LAN cable tester can verify cable continuity, open, short circuit
and miss-wired.
-The remote receiving unit is available for installed cables far away
either on the wall plates or on the patch panels.
-Auto and manual scan functions.
-Ground wire test.
-Lock status function.
-Buzzer sound warning for wire status.
-Display: LED indication for wire status.

SPECIFICATIONS :
Display : LED
Operating-temperature : 0° C ~ 40° C
Dimensions : Master unit
132( L) × 55( W) × 39( D) mm
Remote receiving unit
74( L) × 30( W) × 25( D) mm
Weight : Master unit : 148 g
Remote receiving unit : 33g
Power source : 9V( 6F22) × 1
Safety standard : EN 61326-1

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P      : 081283804273/085774067221

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : 7512CBB7

Y M     : cs_darmatek

Web    : http://www.darmatek.com

Link    : http://darmatek.indonetwork.co.id

            http://darmatek01.blogspot.com

Learn more »

 

FEATURES :
AMPLIFIER PROBE ( 180 CB-A)
The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation
Works with any Tone Generator to identify wires
Volume control for increased sensitivity and adjustable to suit work enviornment
Recessed ON/ OFF button prevents battery drain
Power supply is from any 9V battery with a life of approximately 100 hours
A plug receptacle is designed for head set or hand set
AMPLIFIER PROBE ( 180 CB-G)
Tone Generator is a great tool for locating and identifying cable pairs or individual conductors
Besides providing tone generator, tone generator serves as a continuity and polarity tester
Test results are displayed by a three-colored led
Meets IEC/ EN 61010-1, IEC/ EN 61019-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3

SPECIFICATIONS :

TONE GENERATOR
Waveform Square Wave
Frequeny 1.13KHz + / - 15%
Amplitude 9V P-P
Over Voltage Protection 100V DC
Single Tone yes
Alternating Tone yes

AMPLIFIER PROBE
Frequency Detection 1Hz - 12KHz
Receiver Distance 50 - 60 mm
Sensitivity Control yes
Connection RJ11 connector

GENERAL
Operating Temperature & Humidity 0 degree C ~ 40 degree C, 80% Max
Storage Temperature & Humidity -10 degree C ~ 50 degree C, 80% Max
Power Source Amplifier Probe : 9V battery, Tone Generator : 9V battery
Dimensions Amplifer Probe : 270( L) x 50( W) x 25( H) mm, Tone Generator : 62( L) x 58( W) x 34( H) mm
Weight Amplifer Probe : 125g ( battery included) , Tone Generator : 120g ( battery included)
Safety Standard IEC/ EN 61010-1, IEC/ EN 61010-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3
Accessories Instruction manual, batteries, carry pouch

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P     : 081283804273/085774067221

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : 7512CBB7

Y M     : cs_darmatek

Web    : http://www.darmatek.com

Link     : http://darmatek.indonetwork.co.id

             http://darmatek01.blogspot.com

Learn more »