Megger NET200 Network Performance Tester is an MTDR ( Metallic Time-Domain Reflectometer) device that can measure the cable length and diagnose cable defects such as a break ( open) , shorted-circuit and sudden change of impedance ( such as, repeaters) in graphic and numeric formats.
It also includes many useful functions such as the Crosstalk test, Wiremap test and Network ( TCP/ IP) analysis that can be used to test & compare the cable ( and network) to satisfy required network standards.

Features:
Evaluate the capability of link connections and locate faults up to 500 meters
Detect Wiremap failure ( Pass/ Fail)
RJ45 and BNC connectors
10BASE-T and 100BASE-TX Ethernet, half- or full- duplex support
1000BASE-T, Auto measurement of signal performance, wiremap and length
1 kHz analogue tone signal output suitable for all probe sets

Product Highlights
Evaluate the capability of link connections and locate faults up to 500 meters
Detect Wiremap failure ( Pass/ Fail)
RJ45 and BNC connectors
10BASE-T and 100BASE-TX Ethernet, half- or full- duplex support
1000BASE-T, Auto measurement of signal performance, wiremap and length
1 kHz analogue tone signal output suitable for all probe sets

Each Unit Includes
1 x AC-DC Power adapter
1 x BNC to F-connector
1 x RS232 to USB adapter cable
1 x DC Car charge lead
1 x Portable bag
3 x Power cord ( US, EU, UK)
1 x Remote identifier # 1 

= = = = = = = = = = = = =

Untuk Info dan Pemesanan Hubungi :
DARMATEK
Contact: Subarkah
Telpon : 021-71031268
H P     : 081283804273/085774067221
WA      : 0819 3263 2003
Email   : subarkah18@yahoo.co.id
Gmail  : darmatek1@gmail.com
Pin BB : D2A771BD
Web    : http://www.darmatek.net
Link     : http://darmatek.indonetwork.co.id
             http://darmatek01.blogspot.com

The Megger AVO410 digital multi-meter designed for the contracting electrician has the additional features that also make the instrument suitable for wide range of applications and users.

Description :

•  6000 count backlit digital display
•  True RMS reading on a.c. mode
•  1000 V d.c. / 750 V a.c. ranges
•  10 A a.c. / d.c. ranges
•  Resistance, frequency and capacitance ranges
•  CAT IV 600 V safety rating

====================

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P      : 081283804273/085774067221

WA      : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link     : http://darmatek.indonetwork.co.id

             http://darmatek01.blogspot.com

Description:

•  Designed for Electricians
•  Fully auto ranging
•  Large display characters
•  Separate battery and fuse cover
•  Data hold
•  Min/Max store
•  IEC 61010 compliant
•  Suitable for applications to CATIII 600 V

The AVO300 and AVO310 range of Megger are tough compact instruments designed for the contracting electrician, but are also suitable for a wide range of applications and users.
Both instruments offer a range of measurement modes for AC and DC applications, resistance and current measurement.

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P      : 081283804273/085774067221

WA       : 0819 3263 2003

Email   : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web     : http://www.darmatek.net

Link     : http://darmatek.indonetwork.co.id

              http://darmatek01.blogspot.com

Description:

• Trusted Megger build quality
• The only one that fully tests your instruments to the regs.
• Tests the full range of a testers capability
• Does not trip RCD protected circuits
• Checks insulation, continuity, loop, PFC and RCD functions of testers
• Confirms testers continued performance between calibrations
• Colour coded test functions
• Works with all testers for Part P Certification

The Megger MTB7671/2 Calibration check box is designed to provide confirmation that your testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Certification bodies like the NICEIC, ELECSA, CORGI and others now request evidence of your tester’s accuracy and consistency. Tests to the regulations BS7671, BS EN 61557 and IEE On-Site Guide. 

The Megger MTB7671 checks not only the basic functions of the testers, but also that the correct test current or voltage is being used during the test. For example, a continuity test should not just give a result in ohms, but the short circuit test current should be greater than 200 mA and the open circuit voltage should be within the limits of 4-24 V. The PASS/FAIL values are selected to ensure that where there is a published specification for a test parameter then the MTB7671 will test your tester to ensure that it meets these specifications using a series of simple Pass/Fail indications. 

 Additional test values are provided to ensure that the testers maintain consistent values across the range of their operating specifications.

The values chosen for MTB7671 test points are the same as those supplied on all new Megger test instrument calibration certificates which means that you can confirm that the tester continues to provide results that are consistent with its original calibration points.
The MTB7671/2 calibration checker makes that an easy job. You can test the insulation resistance, continuity, earth loop impedance, PFC, RCD and voltmeter functions of you testers quickly and easily, recording the test results on the record cards included in the pack.
Megger Test Box part number 1002-224

=====================

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P    : 081283804273/085774067221

WA     : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link   : http://darmatek.indonetwork.co.id

            http://darmatek01.blogspot.com

There is a legal requirement for any landlord, employer or owner of a place of work or public place, to ensure that all electrical equipment accessible by tenants, employees or the public is maintained in a safe condition, and an acceptable method of ensuring this is by routine electrical testing. This can be performed by electrical contractors, specialist PAT testing organisations, maintenance departments, or facilities management companies.
 
The PAT400 range is suitable for performing portable appliance testing in locations such as hotels, public houses, schools, colleges, nurseries, shops, offices, theatres, banks, restaurants, cafés, sports and leisure facilities, cinemas, factories and hair salons etc. where high volume testing requires that accurate records may be difficult to maintain, or aided by, on-board memory and download to management software. The PAT450 is particularly suitable for use in tool-hire shops where equipment is routinely tested prior to hire, or service workshops where deep disassembly is routine, and will perform a flash test in addition to standard PAT tests.

Description:

•  Vast on-board memory to keep you the job longer
•  Continuous operation, no need to stop and wait for the tester to cool down
•  Instant re-start as you move from room to room testing
•  Soft keys to speed you through the testing process
•  Full PAT testing including RCD testing
•  Most productive tester in its class

Three new PAT testers with full database functionality based on the well received PAT300 series. The PAT 400 series introduces a new level of convenience and speed to PAT testing using onboard test results.
PAT410 perfect for those content to bond test solely at 200 mA, The smallest, lightest of the PAT400 series weighs only 2.7 kg.
PAT420 offers bond testing at all three currents, 200 mA, 10 A and 25 A and 230 V and 110 V operation. This tester is the choice of those who are full-time industrial or commercial PAT testers.
PAT450 in addition to the three bond test and 230 V and 110 V operation this tester offers 1.5 kV and 3.0 kV flash testing making the perfect tool for hire and repair workshops.

======================

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P     : 081283804273/085774067221

WA      : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link    : http://darmatek.indonetwork.co.id

             http://darmatek01.blogspot.com

Description :

• Simple manual or automatic testing
• User-selectable PASS/FAIL limits
• Fast testing - test times selectable from 1s
• Earth bond testing at 25 A, 10 A and 200 mA
• Tests portable RCDs
• Differential, touch and substitute earth leakage testing

An easily portable desktop appliance tester for testing the safety of portable electrical equipment to meet health and safety regulations. The PAT300 series are fully featured testers with dedicated test buttons for direct access to tests. They are designed for customers who do not require the complexity of a fully configurable database of clients and results within the tester but do need a complete range of functions to allow automatic or manual testing of the widest range of electrical assets. 

There are two products in the range – the PAT310 and the PAT320. The PAT320 is identical to the PAT310, but in addition to the 200 mA earth bond test available on the PAT310, provides high-current test capability at 10 A and 25 A. Without the weight and size of the high current earth bond transformer, the PAT310 is lighter with a low-profile case design providing a more convenient instrument for more mobile applications.

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P     : 081283804273/085774067221

WA     : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link    : http://darmatek.indonetwork.co.id

             http://darmatek01.blogspot.com

Description:

• 2 Wire Non-tripping loop tester
• 50 V to 440 V operation
• 110 V centre-tap loop testing
• CATIV installation testing
• AUTO start - operation
• 0.01 © resolution 

The new Megger two wire earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing solution that does not trip 30 mA RCDs and can be used on a wide range of voltages.
The new LTW300’ s offer a range of features to make earth loop testing safer and easier.
The range consists of:
• LTW315 - 2 Wire loop impedance measurement
• LTW325 - 2 wire + maxZ + ( R1+ R2)
• LTW335 - 2 wire + maxZ + ( R1+ R2) + Download

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P    : 081283804273/085774067221

WA     : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link     : http:// darmatek.indonetwork.co.id

              http://darmatek01.blogspot.com

Description:
• CAT IV 600 V Rated
• Adjustable insulation test voltages – provides 250 V to 1000 V or 50 V to 1000 V.
• A special applications instrument ( Model MIT40X) offers test voltages from 10 V to 100 V in 1 V steps.
• Dual digital display readout
• Exceptional measurement range from 20 G© to 200 G©
• Digital and analog arc display
• Adjustable continuity limit alarm
• Automatically performs PI and DAR tests
• True RMS voltage measurement
• Results storage and wireless Bluetooth download
 
The MIT400 Series replaces the BM400 Series, BM80/ 2, BMM503, BM2000 Series and BM2500 Series
The MIT400 Series offers a range of models to choose from:
• Choice of 4 models for commercial and plant applications – MIT Models 400, 410, 420 and 430
• Choice of 3 models for telecom applications – MIT Models 481, 482 and 485
Plus, check out our unique “ special applications” model. For those who need a unique test voltage, MIT Model 40X offers a variable insulation test voltage from 10 V to 100 V applications in 1 V steps… a solution to practically any unusual measurement requirement you may have.

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P      : 081283804273/085774067221

WA      : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link    : http://darmatek.indonetwork.co.id

             http://darmatek01.blogspot.com

Buy Megger MIT-200 series, Pocket-sized insulation and continuity tester with best price 

Description:
• Insulation testing to 1000 M©
• Continuity testing at 200 mA down to 0.01 ©
• Live circuit warning ( voltage display) and test inhibit
• Digital/ Analogue display
• Alkaline or rechargeable batteries
• – 10º C to + 55º C operating temperature
• CATIII 600 V
• Conforms to EN61557-1
 
The MIT200 series will find applications in electrical contracting, both on domestic and industrial systems, as well as site maintenance and service departments.
The MIT200 series of insulation and continuity testers are ideal for testing transformers, motors, generators,  switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems.
Their small size and light weight make them ideal for those engineers that need to carry them for extended periods.

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P     : 081283804273/085774067221

WA     : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link     : http://darmatek.indonetwork.co.id

              http://darmatek01.blogspot.com

Description Megger MIT-300:

• Extremely easy to use
• Tough rubber armoured case
• Self contained protective cover
• Live circuit warning
• Weatherproof to IP54
• Intelligent Safety System for protection
The complete range of the MIT Series provides indication of insulation resistance up to 999Mohms, 200mA continuity testing, and a fast-reacting continuity buzzer.  

The MIT300 Series replaces BM100/ BM120/ BM220 Series. 

MEGGER INSULATION TESTERS COMBINE SAFETY WITH DURABILITY
Developed, after extensive customer research, specifically to meet the needs of today' s electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to use, but also incorporates a comprehensive set of features designed to ensure operator safety, even under conditions of accidental misuse.

The range includes four models, ensuring an exact match for the needs of every user, all of which offer automatic discharge of the circuit after testing, audible and visual warning if the test probes are applied to a live circuit, and a test inhibit feature which operates automatically under live circuit conditions. The units also conform fully to IEC 61010-1 for use in Category III 600V applications, and provide all of the facilities needed to meet insulation testing requirements relating to the current edition of the IEE Wiring Regulations.
In line with other products in Megger' s comprehensive new contractor range, MIT300 insulation testers feature rugged construction, with an impact-resistant rubber-overmoulded case, and innovative circuitry which guarantees high accuracy combined with stability of calibration.

All instruments in the new range provide indication of insulation resistance up to 999Mohms, 200mA continuity testing, a fast-reacting continuity buzzer, and facilities for nulling the resistance of the test leads. The entry-level MIT300 offers insulation test voltages of 250V and 500V, while the remaining models allow testing at 250V, 500V and 1, 000V.  

In addition to the basic features, the mid-range MIT310 adds a default voltmeter function, while the MIT320 supplements these facilities with an a backlit display, illuminated range panel, insulation limit alarm, resistance measurement, and an adjustable threshold for the continuity buzzer. The MEGIT320 is also supplied with a switched test probe to speed hands free testing.
An illuminated switched test probe is available as an optional extra for use with the MIT320.

The MIT310, and MIT320 testers incorporate dual solid-state displays which simultaneously show the test results numerically, and in the form of a moving-arc bar graph that accurately simulates the operation of an analogue meter.
All testers come complete with a full calibration certificate. For users who prefer a true analogue device, however, Megger is offering the MIT310A which has features similar to those of the MIT310, but with a conventional moving-coil meter movement in place of the digital display.

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P    : 081283804273/085774067221

WA     : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link   : http://darmatek.indonetwork.co.id

      http://darmatek01.blogspot.com

Description:
• Non-trip loop tester
• RCD testing from 10 mA to 1000 mA
• Extremely easy and safe to use
• Built-in protective front cover
• Tough Rubber armoured case
• Weatherproof

The Megger LRCD200 series Loop and RCD Tester is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised circuits.
All Megger LRCD200 series instruments are supplied with a calibration certificate.
Three instruments are available:

Megger LRCD200
This instrument provides 3 phase safe non trip loop testing and 1xI tests of 10mA to 500mA RCDs.
Suitable for applications outside the UK only.

Megger LRCD210
This instrument provides three phase safe non-trip loop testing and 1/ 2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable for domestic installers testing to UK Part P requirements.

Megger LRCD220
As the LRCD210 with the addition of 110 V loop testing and 2 wire fast testing, plus phase to phase and phase to earth measurement.
All three instruments will not trip RCDs rated at 30 mA or
greater during loop testing, even electronic RCDs.

Untuk Info dan Pemesanan Hubungi :

DARMATEK

Contact: Subarkah

Telpon : 021-71031268

H P    : 081283804273/085774067221

WA     : 0819 3263 2003

Email  : subarkah18@yahoo.co.id

Gmail  : darmatek1@gmail.com

Pin BB : D2A771BD

Web    : http://www.darmatek.net

Link   : http://darmatek.indonetwork.co.id

            http://darmatek01.blogspot.com