PIECAL 531 Mini 4-20mA Process Loop Calibrator

 

The Practical Instrument Electronics ( PIE) Model 531 is designed to be a tool with all the practical functions required to get the job done easily without the confusing extras or reading through a complicated manual. The Model 531 can source and read current in the process loop and simulates, power and measure 2-wire transmitters. The PIE 531 fits in your pocket or you can clip it on your belt.

Use the EZ-Check™ switch to quickly switch between a set value, 4mA, and 20mA outputs. In read mode, the EZ-Check™ switch recalls minimum and maximum readings. Clear minimum and maximum memory values with a press of the EZ-Dial™ knob. There are two speeds for dialing in ranges. When you press down on the EZ-Dial™ it will select a faster dialing speed.

Key Features: 
True + / - 0.05% of reading accuracy
Source and read 0.00 - 24.00mA
Simulate 2-wire transmitters 0.00 - 24.00mA
Power 2-wire transmitters and read 0.00 - 24.00mA
Display current in mA or -25.00 - 125.00% of 4-20mA
Full 4 digit display
Drive 1200©
User selectable 250© resistor in series with the output for compatibility with HART® protocol enabled devices.
EZ-Dial™ knob easily adjust output by 0.01mA ( 0.01% ) or 0.10mA ( 1.00% ) .
EZ-Check™ switch
User settable EZ-Check™ for 0% and 100% span adjustments
Uses 2 AA alkaline batteries.
Superior battery life of 45 hours under typical continuous usage
Easy access to battery compartment
Lightweight, Rugged and Reliable
Small, tough and protected to 60V

Untuk Info dan Pemesanan Hubungi :
DARMATEK
Contact: Subarkah
Telpon : 021-71031268
H P      : 081283804273/085774067221
Email   : subarkah18@yahoo.co.id
Gmail  : darmatek1@gmail.com
Pin BB : 7512CBB7
Y M     : cs_darmatek
Web    : http://www.darmatek.com
Link    : http://darmatek.indonetwork.co.id
            http://darmatek01.blogspot.com