PIECAL 532 MA/ Voltage Loop Calibrator

 

The Practical Instrument Electronics’ Model 532 is the best tool for calibration, test, and diagnosing process loops. The Model 532 brings all the features you would expect from a loop calibrator and timesaving new ones. Make adjustments with the EZ-Dial Knob or test limits with the dual action EZ-Check Switch. Powerful ramping functions are only a button away on the Model 532. Save potentially hours of troubleshooting time on problem loops with the 532’ s unique Loop Diagnostic Mode.

Features:
True ± 0.012% of reading accuracy
Source and Read 0.000-24.000 mA
Simulate 2-Wire Transmitters
Power 2-Wire Transmitters and Read 0.000-24.000mA
Display current in mA or -25.00-125.00 % of 4-20 mA
Read 0.00 to ± 30.00 VDC with 4X over range ability
Source 0.000 to 24.000 VDC with up to 20mA output
Direct Calibration 1.000V to 5.000V
Auto Step or Ramp
Selectable step sizes, time in-between steps & soak time
Stop watch like EZ-Check switch
Full 5 Digit Display
Uses 1 - 9Volt alkaline battery
Superior battery life of 40 hours under typical continuous usage
Easy access to battery compartment
240 VAC Tolerant
HART protocol compatibility mode
Uses 4 AA alkaline batteries
Power on selectable 250É resistor in series with the output for compatibility with HART® protocol enabled devices.
NIST Traceable Calibration Certificate included FREE

Untuk Info dan Pemesanan Hubungi :
DARMATEK
Contact: Subarkah
Telpon : 021-71031268
H P      : 081283804273/085774067221
Email  : subarkah18@yahoo.co.id
Gmail  : darmatek1@gmail.com
Pin BB : 7512CBB7
Y M     : cs_darmatek
Web    : http://www.darmatek.com
Link    : http://darmatek.indonetwork.co.id
            http://darmatek01.blogspot.com