Jual SEW 186CB Cable Tracer and Digital Multimeter

Features :

Cable Tracer

● Trace wires or cables.
● Volume control.
● Tip & Ring identification.
● 2 bi-colored LEDs ( Line 1 & Line 2).
● Tone speed selection : Fast & Slow.
● A phone jack is designed for headset or handset.
   (Amplifier probe)

Digital Multimeter

● 4000 counts.
● ACV, DCV.
● Ohm, Diode, & Continuity testing.
● Auto-range.
● Data hold.
● Low battery indication.
● Select function.
● Auto-off.

Spesification :

AC Voltage    Range   Resolution   Accuracy    400mV   0.1mV   ±(1.0%rdg+5dgt)   4V   1mV  40V   10mV  400V   100mV   750V   1V  DC Voltage   Range   Resolution   Accuracy    400mV   0.1mV  ±(0.5%rdg+3dgt)   4V   1mV  40V   10mV  400V   100mV   1000V   1V  Resistance   Range   Resolution   Accuracy   400Ω 0.1Ω ±(1.2%rdg+3dgt) 4kΩ 1Ω 40kΩ 10Ω 400kΩ 100Ω 4MΩ 1kΩ 40MΩ 10kΩ ±(2.0%rdg+4dgt)  Continuity Test Range Audible threshold 400Ω Less than 25Ω  SPECIFICATIONS   Frequency detection  Amplifier Probe: 1Hz~12kHz  Tone Generator: 1kHz  ±15%  Over protection  Tone Generator: 80V DC  Alternating tone  Fast and Slow  Connection  Tone Generator : RJ11 connector                              alligator clip x 2  Sensitivity control   ˇ  Receiver distance  <50cm  Operating  temperature  & humidity  0°C ~ 40°C, 80% Max.  Temperature  & humidity  Operating:  0°C~40°C ≤80% R.H.  Storage:   -10°C~50°C ≤80% R.H.  Dimensions  Amplifier Probe:  230(L) x 56(W) x 27(D)mm  Tone Generator/DMM:  183(L) x 82 (W) x  44(D)mm  Weight  (battery included)  Amplifier Probe: 125g  Tone Generator/DMM: 305g  Power source  Amplifier Probe: 9V(6F22) × 1  Tone Generator: 9V(6F22) × 1  DMM: 1.5V(AAA) x  2  Safety standard  EN 61010-1 CAT Ⅲ 600V  EN 61326-1 EN 55011  EN 61000-4-2  EN 61000-4-3