HIOKI 3169-20 / 21 Clamp ON Power HiTester

Detail Produk HIOKI 3169-20 / -21 CLAMP ONPOWER HiTESTER 

Basic specifications :

• Measurement line & number of circuits Single-phase 2-wire ( 4 circuits) , single-phase 3-wire ( 2 circuits) , three-phase 3-wire ( 2 or 1 circuit) , and three-phase 4-wire ( 1 circuit)
• Note: 50 or 60 Hz, and that share the same voltage line
• Measurement item Voltage, current, active/ reactive/ apparent power, active/ reactive power integration, power factor, frequency, harmonic value
• Measurement range Voltage range: 150/ 300/ 600 V AC
• Current range: [ when using the 9694] 500 mA, 1/ 5 A AC
• [ when using the 9695-02] 500 mA, 1/ 5/ 10/ 50 A AC,
• [ when using the 9660, 9695-03] 5/ 10/ 50/ 100 A AC
• [ when using the 9661] 5/ 10/ 50/ 100/ 500 A AC
• [ when using the 9669] 100/ 500/ 1 kA AC
• [ when using the 9667] 500/ 5 kA AC
• Power range: 75 W to 9 MW ( Depends on combination of voltage and current range)
• Measurement method Digital sampling, PLL synchronization or 50/ 60 Hz fixed clock
• Basic accuracy Active power: ± 0.2% rdg. ± 0.1% f.s. + clamp-on sensor accuracy ( at 45 to 66 Hz)
• Display refresh rate 2 times / sec ( except when using a PC card while accessing the internal memory, or when performing RS-232C communications)
• Data save interval Standard interval: 1/ 2/ 5/ 10/ 15/ 30 seconds, or 1/ 2/ 5/ 10/ 15/ 30/ 60 minutes
• Frequency characterristics Fundamental waveforms up to the 50th order ± 3% f.s. + measurement accuracy ( of a 45- to 66-Hz fundamental waveform)
• Other functions Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [ 3169-21 only] D/ A output 4 channels, ± 5 V DC f.s.)
• Power requirements 100 to 240 V AC, 50/ 60 Hz, 30 VA max.
• Dimensions, mass 210 mm ( 8.27 in) W × 160 mm ( 6.30 in) H × 60 mm ( 2.36 in) D, 1.2 kg ( 42.3 oz)
• Supplied accessories Voltage cord set 9438-53 × 1 ( 1 cord each of black, red,yellow, and blue) , Power cord × 1, Instruction manual × 1, Quick start manual× 1, CD-R × 1 ( RS-232C interface operating manuals) , Input cord label × 1,Connection cable 9441 × 1 ( for the 3169-21 only)